Re: Shift shaft o-ring plug

[RICHARD A. WHITE]

quote rickrodt:

Did you install or replace the gasket that goes in first? First the gasket, then o-ring and finally the brass bushing. Part number 304764 should be the part you need. I also believe that the brass bushing has a recess area where the o-ring sits. The smaller motors just use the o-ring and bushing, no gasket.

http://www.marineengine.com/parts/johns … n=Gearcase

Yuppers, even cleaned around the brass plug.

I will apply sealer around the perimeter this evening and see how that does..

Thanks to all

http://www.richardsoutboardtools.com
classicomctools@gmail.com