Home › Forum › Ask A Member › Update on pristine 50$ 9622a 9.5hp › Re: Update on pristine 50$ 9622a 9.5hp
June 7, 2015 at 1:35 am
#17723
quote Mr. Asa:
If you can remove any of the ports so that you can see into the cylinder, you can check the rings with a little screwdriver. You can push them, if they move they’re free and you’re (probably) good.
It’s not that hard to take them apart and get them back together after. You just need to keep track of the parts. There’s enough information here to help you out if you get stuck
The 9.5HP motors like this don’t have the traditional port/exhaust covers, so not easy to look inside.
I woud do a quick compression check, and give it a go! Run it a bit and check compression again.