Home › Forum › Ask A Member › Repairing cracked solder joints in 1922 Elto Light twin tank. › Re: Repairing cracked solder joints in 1922 Elto Light twin tank.
June 27, 2017 at 6:27 pm
#60475
Just the right mix is all it takes. Add a little dishsoap to the water, then very carefully wipe the torch past the cap opening full of water, drain & repeat. Then fix the tank, but get it very clean & a little flux too boot. A dose of acetone afterwards to remove any moisture.
Me, I would be the nut to desolder it to clean the inside too, just how I’m wired,