It isn’t scanned but you can buy the Gingery book which has instructions for building one. The one I built was a cross between the Gingery design and a Stevens unit. A generous club member gave me the specs and measurements of his Stevens unit so I had something to compare to. Thanks Lloyd! Here’s a link to another post on this charger.
viewtopic.php?f=22&t=7777
Amazon is probably the cheapest place to find the book but you can also find them on Ebay and other places. If you come out to the West Coast this summer, bring your flywheel along and I’ll charge it up for you!
https://www.amazon.com/gp/product/18780 … HWK55XCGG2
rudderless: You were close but no cigar, The green light shows power to the unit and the red light indicates when the charging system is activated. The cap is to smooth out the rectified AC current which is now DC going into the coils.
For shoes I turned them out of the thickest material I had on hand at the time. When it warms up I’ll make some thicker ones, closer to one inch.
Attachments:
