Home › Forum › Ask A Member › Transom Wood › Re: Transom Wood
I’m replacing mine right now in my 14 foot Alumacraft. I think mine is an FD, but no number so I’m not certain. The thickness of my inside board is 1.06" it’s supposedly a 5/4 white oak board but I had my rough sawn board planed to 1.15" and it’s still too thick to go under the cap and the Aqueduct braces won’t fit yet. I didn’t have my original board out yet whenot I bought the replacement. They may vary a little by Model. I have a Flying C that will be getting replaced at some point too, but not yet. 3/8 Marine plywood on the outside of bother of my Alumacrafts. My wood guy didn’t have any 5/4 white oak either so I’m going back in with hickory in the FD.
-Ben
OldJohnnyRude on YouTube