Re: Evinrude 35 hp will not go into gear.

Home › Forum › Ask A Member › Evinrude 35 hp will not go into gear. › Re: Evinrude 35 hp will not go into gear.

August 4, 2016 at 10:38 pm #41602
jeff-register
Participant

    No Remove the ENGINE from the outboard to expose the shift linkage for trouble shooting.
    ABOUT 50% down the outboard exhaust housing look for an access plate held on by two screws.
    REmove those two screws & remove the plate to look at linkage coupling missing a securing screw or two
    ORDER a new head gasket & replace the head. 💡