Re: Shift shaft o-ring plug

Home › Forum › Ask A Member › Shift shaft o-ring plug › Re: Shift shaft o-ring plug

August 2, 2016 at 1:39 am #41443
RICK EICHRODT
Participant

    Did you install or replace the gasket that goes in first? First the gasket, then o-ring and finally the brass bushing. Part number 304764 should be the part you need. I also believe that the brass bushing has a recess area where the o-ring sits. The smaller motors just use the o-ring and bushing, no gasket.

    http://www.marineengine.com/parts/johns … n=Gearcase