Re: OMC vs HF flywheel puller

Home › Forum › Ask A Member › OMC vs HF flywheel puller › Re: OMC vs HF flywheel puller

July 25, 2016 at 2:15 am #40876
sydinnj
Participant

    I just used the omc puller on a 58 lark last week. They work great.on stubborn ones I put the load on the center bolt then pry the flywheel up with a heavy duty screw driver to lift the ply in the crank. Then give the center bolt a wack with a small sledge. then re tighten the center bolt. normally 2 or 3 times of this and it will pop free.