Reply To: 1934 Evinrude imperial lite 4

Home › Forum › Ask A Member › 1934 Evinrude imperial lite 4 › Reply To: 1934 Evinrude imperial lite 4

August 16, 2026 at 10:29 pm #326510
JOSEPH BRINCAT
Participant

    US MEMBER PAY BY CHECK

    Test the secondary (high voltage) winding as depicted in Tubs post. On a good coil you should see about 7, 000 to 8,000 ohms. The reading of 0.5 ohms that you saw was for the primary ( low voltage) coil. 0.5 t0 1 ohm is good. Extremely rare for the primary winding to be bad

    Joe B