Reply To: Cd11 tricky hose routing…

[JACQUES]

The air pressure pulse nipple  and carb inlet probably  but my round mikuni pump barbs are 5/16 barbs  like my cheapo* amazon side connector.  found some blue  fuel  line  in my kit box  looks like  .25  it does fit th carb and pressure barbs  but i’ll have to mcgiver them into 5/16 pump side. .

 

the main  fuel hose (side connector to pump in) is rubber  5/16 and fits  ok

so I have  2  lines to mate  (pulse and  fuel out)  to the pump barbs  I’ll figure something out or  sand  down the rims on the pump  barbs down to .25 (4/16)

• notice the rounded  base is backwards  for a CD   Ii needed to square off the round end to flip it over and  round out the  square end !

thanks

Joining AOMCI has priviledges 🙂