Reply To: Evinrude transom clamp screw pad

Home › Forum › Ask A Member › Evinrude transom clamp screw pad › Reply To: Evinrude transom clamp screw pad

January 21, 2026 at 2:27 pm #303655
RICHARD A. WHITE
Participant

    Lifetime Member

    Yes…. place an open end wrench, about 3/4 should do, between the pad and the transom bracket. Then back the transom screw out and it will “pop” off of the screw.

    http://www.richardsoutboardtools.com
    classicomctools@gmail.com