Reply To: KA 37

Home › Forum › Ask A Member › KA 37 › Reply To: KA 37

October 22, 2024 at 12:32 pm #291681
ALBERT MOORE
Participant

    US MEMBER PAY BY CHECK

    Boonie

    I have the piston and rod out of the block, the piston measures 2/16 diameter

    the rod and cap is brass there is no play in the wrist pin and there is very little

    scrape marks on side of piston at the wrist pin hole . but in good shape.  there are 2 small rings at bottom

    of piston and  2 rings at near top and 2 rings are missing for the very top . Crank  shaft size is about 7/8 inch

    hope this helps AL

    al