Home › Forum › Ask A Member › Cork float TD-20 › Reply To: Cork float TD-20
March 11, 2024 at 4:05 am
#285802
Originals were coated with orange shellac. Modern gas dissolves shellac. Nuff said. I use the Mercury Nitrophyl float. Your choice
The Mercury float is the best option. You just have to drill the hole slightly larger to accommodate the brass needle. It should fit snug. It’s very important whichever float you use to install the tiny clip with the screw in the top of the float, and the clip then fits into the groove in the needle. That clip controls the float and fuel level.
Improvise-Adapt-Overcome