Reply To: QD16 Restoration

[Jeff Barsch]

Crosbyman,

sorry for the confusion!  You are correct I am looking for a pull starter recoil and the right side pull starter mounting bracket.

Before deciding to source parts I checked and the compression was good on both cylinders, I don’t have a gauge but it blew my thumb off both holes.  I also stuck pencil in both cylinders and no rod knock and pulled the bypass covers and no visible scoring.   Lower unit oil had no water and held 5 lbs air. Carb cleaned up nicely.  I believe she will be a runner.

Planning to do usual ignition rebuild, fuel lines, impeller.

Thanks!

 

Jeff

1954 Evinrude 7.5 HP
1954 Evinrude 15 HP
1954 Gale 12 HP
1955 Johnson 10 HP
1956 Johnson 10 HP
1956 Gale 12 HP
1956 Evinrude 5.5 HP
1957 Johnson Golden Javelin 35
1958 Johnson 7.5
1960 Evinrude 18 HP
1973 Johnson 6 HP