Reply To: Resealing an old cork carburetor float

Home › Forum › Ask A Member › Resealing an old cork carburetor float › Reply To: Resealing an old cork carburetor float

January 30, 2023 at 8:35 pm #272118
need2fish
Participant

    I like the way you’re tracking the aging. A very scientific approach.

    I’ve coated cork floats with dope and others with crazy glue (outside) – 6 motors with one and 6 motors with the other. After 20 years on the rack and/or on the transom, the only failures are where (on early Johnsons) I didn’t ram enough sealant down the float needle hole in the center of the cork.