Reply To: Stripper bolts size and TPI for 81 Evinrude 15

Home › Forum › Ask A Member › Stripper bolts size and TPI for 81 Evinrude 15 › Reply To: Stripper bolts size and TPI for 81 Evinrude 15

June 6, 2022 at 10:40 pm #261083
JOSEPH BRINCAT
Participant

    US MEMBER PAY BY CHECK

    Under no circumstances apply a gear puller to the flywheel rim… NEVER.

    As for the bolts, I have used regular grade 8  bolts ,  1/4 – 20 I believe for your motor. Put strong tension on the puller, then a good hard blow  to the puller screw with a heavy hammer. Be sure to still have the flywheel nut installed, just backed off a few turns., unless you are good at catching a flying flywheel.

    Joe B