Reply To: ignition timing

Home › Forum › Ask A Member › ignition timing › Reply To: ignition timing

April 4, 2022 at 3:59 pm #257471
JACQUES
Participant

    poke a pencil in an open  plug hole   find  exact TDC  by rotating the prop in gear that is where the points must  “just”  open  for that cyl   (front coil is top points     back coil is bottom cyl. points)

     

    otherwise find the high spot on the cam and set points at 0.020  after a good clean up

    Joining AOMCI has priviledges 🙂