Home › Forum › Ask A Member › Evinrude 25hp Big Twin Model 25018 “The Evil One” › Reply To: Evinrude 25hp Big Twin Model 25018 “The Evil One”
Olcah, thanks for the photo. I pulled off the extended water tube today – It had n extension which required that heating it up with a heat gun and then twisting it off. It had a type of joint with a lip which was apparently filled with some type of tar-like cement, but thankfully not solder. (Its just some 1/2″ or so copper plumbing pipe, so not a big deal if it had to be replaced). I’ll post some photos of it. As for the shifter, It did not have an extended shift rod,, but instead an extended shift rod connector, which I have never seen in any of the parts catalogs I have. I’ll have to get a standard size shift connector. Thanks for your insight!
Regards,
John