Reply To: DT 37 Johnson water pump

Home › Forum › Ask A Member › DT 37 Johnson water pump › Reply To: DT 37 Johnson water pump

August 11, 2021 at 12:51 pm #244719
GARY SMITH
Participant

    I took the pump apart and the small check ball was stuck so thanks for the tip. Now does the lower unit get marine grease and do I pack it in or just coat the gears and prop shaft ? I have to make a new gasket for the housing as I was a little over zealous taking it apart. Other than that it looks ok except for a pretty good wear mark on the back end of the prop shaft.