Re: Johnson of Oakland, Kaminc, and St. Annus Props

Home › Forum › Ask A Member › Johnson of Oakland, Kaminc, and Stannus Props › Re: Johnson of Oakland, Kaminc, and St. Annus Props

December 2, 2015 at 4:01 am #27909
handyandy
Participant

    Well I went back and made a deal. Turns out an older couple brought them in; they had owned a marine service business and these were take-offs for repair/replacement. A couple have bent tips or chips off the trailing edge, but most appear in good shape.

    I have one ID’ed for sure. It has the OMC part 100726. The 1945 Evinrude Service manual says this is the standard for Models 905-907 Elto Special Speedster 9 HP 1931-1933.

    Others to be identified:

    Michigan KD5 (8.5" diameter, have not measured pitch yet)

    Kaminc MC 4634 7" x 10 (marked)

    Stannus 1477-1 8.5" diameter
    Stannus 1477-2 8.5" diameter
    Stannus 1429-1 8.5" diameter

    Unmarked 9.5" diameter

    Johnson of Oakland 8 1/2 (marked 8 3/4") x 12 1/2 (marked)
    Johnson of Oakland 8 3/4" (marked 9") x 11 1/2 (marked)
    Johnson of Oakland 8 3/4" (marked 9") x 11 (marked)
    Johnson of Oakland 8 3/4" (marked 9") x 13 (marked)