Reply To: New coils no spark 1956 15 hp evinrude

Home › Forum › Ask A Member › New coils no spark 1956 15 hp evinrude › Reply To: New coils no spark 1956 15 hp evinrude

October 3, 2020 at 8:09 pm #217752
JACQUES
Participant

    follow the video… when the timing marks line up the points should …just open…don’t worry about the rest of the gap

    the coil will fire when … points are ….just openning

    please post… again ? individual coil resistances primary to primary and primary to screw point in the coils then install the plug wires and remeasure. the secondary coil value should be the same at the plug clip inside the boot if not find out why it is not .

    since you do not have the tool shown below center the marks on the FW ad plate edge….. lift the flywheel off (DO NOT MOVE ANYTHING) and just… break the point contact with the adjusting screw

    Joining AOMCI has priviledges 🙂