Reply To: New coils no spark 1956 15 hp evinrude

Home › Forum › Ask A Member › New coils no spark 1956 15 hp evinrude › Reply To: New coils no spark 1956 15 hp evinrude

October 2, 2020 at 7:23 am #217667
JACQUES
Participant

    trainsnmore wrote:

    How do I check continuity from end of spark plug wire to the coil?

    with coils primaries connected (one is grounded)

    stick one probe of the VOM in the plug boot spring clip and one touching the engine body set the meter above 10K ohms range or better yet use a digital meter

    you MUST see 4-8Kohms on each wire if not the coil secondaries are open or the plug wires are open

    simple test … post results

    Joining AOMCI has priviledges 🙂