Reply To: New coils no spark 1956 15 hp evinrude

Home › Forum › Ask A Member › New coils no spark 1956 15 hp evinrude › Reply To: New coils no spark 1956 15 hp evinrude

September 28, 2020 at 12:26 pm #217473
Evinrude 25
Participant

    I have an aluminum tubing with 6″ OD and 4.0″ ID. I slide it 1.25″ thick and put in the lathe to bore out to 4.468″ ID. and clean up both sides to make it look good. You don’t need 1.25″ thick, It could be 1″ thick. If you don’t have tubing, just use 6″ x 6″ x 1″ or 3/4″ plate and bore out the ID. It does not look good but square plate with this ID could serve the purpose.