Reply To: Evinrude 18 HP Fastwin won’t rev high under load

Home › Forum › Ask A Member › Evinrude 18 HP Fastwin won’t rev high under load › Reply To: Evinrude 18 HP Fastwin won’t rev high under load

July 9, 2020 at 10:11 pm #208223
JerseyBoater
Participant
    Bob Wight wrote:

    Also look for the mag plate mounting screws being drawn up too tight causing the retaining ring to pull upward and bind against the plate support ring.

    Are these the screws that hold the chips on? I didn’t take the mag plate off, only the condensers and coils….