Reply To: silly but need to know

Home › Forum › Ask A Member › silly but need to know › Reply To: silly but need to know

June 11, 2020 at 1:08 pm #205446
JACQUES
Participant

    well problem is solved….. maybe the 28tpi thread was to finicky i’ll never know

    throttle shaft has been tapped 1/4 inch 20 tpi and a nice stainless oval head bolt screwed right in flush in the handle. A touch of latex glue under the bolt head will secure it from vibrations
    in case the threads are a bit thin . (I did not want to go 5/16 )

    Joining AOMCI has priviledges 🙂