Re: Johnson A 35

[Rob]

Thanks B.Morrison! I’ll definitely try the 50/50 mix!

I guess my question goes a little further than that. I got all the screws out of the cylinders but the cylinders aren’t budging at all. I guess I am asking about how I should I go about ‘persuading’ the cylinders off of the pistons/rings. I tried heating the cylinder with propane which didn’t help at all; the cylinders didn’t move at all. Then, I used a block of wood and a hammer and tried tapping on the side of the cylinders but that didn’t accomplish anything. I feel that just blatantly beating on this thing with a hammer and a block of wood is counter productive. So I guess what I am asking is; what technique I should employ to get this motor apart? I don’t mind taking it slow, I just want to move in the right direction without breaking more than I have to. Any suggestions or advise would be appreciated 🙂

Thanks!
Rob

Rob