Home › Forum › Ask A Member › silencer screw size & thread › Re: silencer screw size & thread
😳 thanks BobW
for some reason I hadn’t read your reply when I also found the answer… 10/24 1 inch long oval head
Adam1961…
checked out the motor….:-)
90 psi each cyl. well oiled walls (stored properly it looks) smooth pulling
both plugs J6C firing nicely but I’ll pull the flywheel to shine the points and check everything out and retime with VOM . ( plugs should be J4C it seems .) good coils (modern stuff) no cracks plug wires in good shape & original
all in all not bad find for a 60$ CDN 🙂 impeller job needed …just in case so off with the head to check everything
next decision… convert to pump or not ..done a few CD AD FD QD & all work great
Joining AOMCI has priviledges 🙂