Re: 1957 Mark 30 lower unit setup

Home › Forum › Ask A Member › 1957 Mark 30 lower unit setup › Re: 1957 Mark 30 lower unit setup

October 27, 2018 at 10:26 pm #85074
chipster303
Participant

    US MEMBER PAY BY CHECK

    Thanks, Frank.
    I have this parts list. I have shims (part number 15-24592) but don’t think they will solve my problem. I do not have shims (part number 15-20822). They are not illustrated and I wonder where they go and if they will resolve my issue. Currently, there is only about .004 gap between the reverse gear and the ball bearing. Not sure if I can pick up any gear clearance by reducing this gap somehow.
    I have no shims (15-20788) behind the forward gear, and do not need any there.
    Thank you for your reply. I hope someone can shed light on this issue!