Re: Elto Handifour

[jim-moffatt]

Phil
Some more points on this motor assuming its unstuck:
1. The carburetor has a primer pump and it must be working properly to easily start the motor. With the carb off; work the pump with some alcohol or gas in the bowl and make sure it comes out the orifice in the main air tube.
2. The main needle fits in a brass tube which has a hole drilled in its side. THe hole must line up with the inlet passage in the carb casting. Sometimes the tube can be misaligned and no gas can enter the carb. It can be twisted back in correct position.