Home › Forum › Ask A Member › Row Boat Motor Tank Repair › Re: Row Boat Motor Tank Repair
October 10, 2018 at 1:43 am
#84224
quote Lyks2Tinkr:
I highly recommend the Damon Redkote sealer.
It is made for tanks like that. Solder the pinholes and follow the instuctions. Use two coats.
It stays flexible. It’s all I use.
I had a similar situation on my OA55 tank. I soldered the pin holes and lined it. That was 11 years ago and gallons and gallons of gas have been through the tank with no issues.
If used per directions it’s extremely durable.
A quart of it goes a long way.
It is made for tanks like that. Solder the pinholes and follow the instuctions. Use two coats.
It stays flexible. It’s all I use.
I had a similar situation on my OA55 tank. I soldered the pin holes and lined it. That was 11 years ago and gallons and gallons of gas have been through the tank with no issues.
If used per directions it’s extremely durable.
A quart of it goes a long way.
I just ordered a quart of it, as I didn’t see it in pints. Is the can resealable,
and will a "once opened" can stay good for future use for a while?
POR-15 says "use the whole can", and not to re-use it, but I have before.
Prepare to be boarded!