Home › Forum › Ask A Member › OMC Gear Case › Re: OMC Gear Case
October 8, 2018 at 9:26 am
#84142
I did one by drilling an angled hole down from the OUTSIDE, on the nose, down to meet the hole where the pin is. Then I drove the pin out to it’s normal depth with a pin punch, tapped my drilled hole and Loctited in a stainless set screw. I think I used a #10-24 set screw, so I picked a drill size for that. I’m not particularly proud of it but it worked.
Long live American manufacturing!