Re: Adhesive for 1963 Evinrude Fastwin Cowl Gasket

[h20lew]

All good suggestions. I went to the 3M website and could’t tell from the specs they gave if 3M 08008 (black) is any different than 3M 08001 (yellow) – the descriptions are similar, but not identical…. I emailed 3M to get an official response if the difference is just color or if there is more to it. It seemed the original adhesive was yellow in color. I like the idea of the Locktite Stick ‘n Seal product (since it’s clear) and also the gorilla tape at the corners where there is the most tension….(but don’t want something that will rip off the paint if it is removed)… Will wait to hear back from 3M before deciding. Usually 3M stuff just works.. Open to hear other feedback, suggestions, and experiences with any of these products in the meantime. Thanks again everyone!