Re: Synching carbs and ignition on 1972 85 hp V4

[amuller]

I still had trouble understanding what to do, given that nothing was quite right. This is what I did,in order of doing. Errors?

Adjusted links to sync choke and throttle flaps.
Adjusted timing pointer with dial indicator, etc.
Adjusted max timing advance to 28 deg. BTDC (Static, not running).
Adjusted "idle" timing to 5 deg BTDC with "idle speed screw." (static).
Adjusted throttle cam so upper mark bisects pin by turning yoke on threaded link.
Adjusted pin/roller on throttle cam.
Adjusted full throttle stop so as to not "preload" throttle shafts.