Re: Johnson RD-16 Parts Manual

Home › Forum › Ask A Member › Johnson RD-16 Parts Manual › Re: Johnson RD-16 Parts Manual

September 11, 2018 at 12:24 pm #82625
fisherman6
Participant

    US Member

    Thanks Buc! I think that’s all I need. The magneto wire routing looks like it should be the same. I think part of the original wire broke off at the clip. I’ll have to remove the mag plate again and see if I can add to or if I need to replace that wire. Someone had completely removed the cutout switch so I had a piece of hose with nowhere to connect too. I borrowed a switch from a basket case 56 Lark I have. I’ll have o replace that when I find one. At least I should be able to get this RD back up and running pretty soon.
    -Ben

    OldJohnnyRude on YouTube