Re: Evinrude ’57 Fisherman Throttle / Idle Adjustment?

Home › Forum › Ask A Member › Evinrude ’57 Fisherman Throttle / Idle Adjustment? › Re: Evinrude ’57 Fisherman Throttle / Idle Adjustment?

June 28, 2015 at 11:24 am #19084
david-bartlett
Participant

    Mondo,

    The rotation of the mag plate will make the point opening smaller or larger as it rotates around the high spot of the cam, so yes it matters if using a feeler gauge. If using a timing jig, you will be moving the mag plate as you adjust things.

    This probably confuses the issue more than clarifying it.