Home › Forum › Ask A Member › 1954 Gale mfg Hiawatha 3 hp › Re: 1954 Gale mfg Hiawatha 3 hp
August 24, 2018 at 6:55 pm
#81714
I can check the exhaust relief slots, but it seems I poked them and they appeared solid. I will check again. The diagram I have is from Gale manual and it shows the water tube, but I don’t have one, and the video shows water spurting out the side where I have no hole. There was no rubber gasket between the two lower halves when I took it apart. Only rubber is inside the housing.