Re: RDE-17 Johnson tuning issues

Home › Forum › Ask A Member › RDE-17 Johnson tuning issues › Re: RDE-17 Johnson tuning issues

August 18, 2018 at 9:19 pm #81422
fisherman6
Participant

    US Member

    Buc, If you out a boss gasket in the carb, your initial setting will have to be farther out than 1/3 turn. There is not a problem with putting one in and I always do. They did not come with one though. The thought was that the fuel consumption was sufficient that proper adjustment could still be achieved without it. Since you put one in, start with that high speed needle 1 turn out. It will be rich, but you will be able to tune it right in.
    -Ben

    OldJohnnyRude on YouTube