Re: Must-Do Items Before Trying to Start a ’57 ?

[chris-p]

Step 1: Test Compression. Report findings after testing cold and dry.
Step 2: If compression checks out, test spark. Set an inline tester to 1/4". Spark should jump with a bright blue ZAP!! If weak or non existent spark, time to pop the flywheel and inspect ignition.
Step 3: Before running, drain old gear oil and replace with new. Install new crush washers on drain and vent screws.
Step 4: Drop gearcase and install new impeller.

At that point start it and decide if you need to pull the carb to clean/rebuild. Looks like someone has already done the fuel lines.

Keep us updated!