Re: Motor starts then dies.

Home › Forum › Ask A Member › Motor starts then dies. › Re: Motor starts then dies.

July 23, 2018 at 10:10 pm #79982
jerry-ahrens
Participant

    US MEMBER PAY BY CHECK

    Yes, I would get rid of that gas and start over with a 24/1 mix with a good brand TCW3 outboard oil. The Poulan oil may cause excessive smoking, but that motor will smoke anyway with a 24/1 mix.. so that’s normal. You will need to run the motor full throttle and adjust the high speed needle FIRST, then idle down to a trolling speed to do the low speed needle. Glad you got it fixed!