Re: 1952 Viking OMC 12vd10

[billy-t]

Thanks Fellows

My set up is shown just slightly different than the diagram attached. The Dial knob on the front is separate from the trigger that sets the choke. That piece you can just see sticking out past the knob in the diagram, mine is separated from the dial and has a small set screw that screws down on to the side of high speed needle. But i guess i can just tighten it down on the needle so that it will close the choke when the needle is rotated left.

Thanks, I will stop being so timid. Usually afraid of breaking something before understanding it.

Thanks again I really appreciate it.