Re: RDE-17 Mid Section & Gear Case, "This and That"

Home › Forum › Ask A Member › RDE-17 Mid Section & Gear Case, "This and That" › Re: RDE-17 Mid Section & Gear Case, "This and That"

July 16, 2018 at 4:54 pm #79650
frankr
Participant

    The plug should just yank out. But if it is that stubborn, it might be better off left alone—if not drilled through or drilling replugged. You don’t want to break the thin material surrounding it.

    Looks like good work on the shifter. The interlock bar normally holds it "in", but your spacer is ok. Yeah, bottom end points aft.

    I say that is the remains of a busted screw in the bypass cover

    Yep, that is a free floating bushing by design.