Re: 55 RDE-17, 25 hp, Power Head O-rings, etc

Home › Forum › Ask A Member › 55 RDE-17, 25 hp, Power Head O-rings, etc › Re: 55 RDE-17, 25 hp, Power Head O-rings, etc

July 10, 2018 at 1:22 am #79299
fisherman6
Participant

    US Member

    For my pressure tester I used a piece of aluminum round bar stock. I threaded it for 3/8-16 on one end with a step for an O-ring. I drilled a hole thru the center. Drilled and tapped for a 0-15psi pressure gauge in the end opposite the 3/8-16 thread and a cross hole drilled and tapped for a Schrader valve. I have used it with a bicycle pump, but prefer regulated compressed air. I’ll try to post pics again soon. For some reason it isn’t working right now.
    -Ben

    OldJohnnyRude on YouTube