Home › Forum › Ask A Member › 1963 Evinrude 10 HP running problem › Re: 1963 Evinrude 10 HP running problem
July 8, 2018 at 9:35 pm
#79245
Well, maybe that burn mark on the mag plate was from older coils that were replaced with the ones in your picture. At this point, I would use those inline neon testers or a timing light to see which cylinder is losing fire. It is possible that it is dropping a cylinder due to other conditions besides ignition problems. Not real likely, but possible. Isolating the cylinder that is losing fire/dropping out will help close in on the problem….