Home › Forum › Ask A Member › 55 RDE-17, 25 hp, Power Head O-rings, etc › Re: 55 RDE-17, 25 hp, Power Head O-rings, etc
July 8, 2018 at 11:57 am
#79209
The o-rings you speak of—-The upper one and one of the lower ones are inside the carbon seal. No need to pull the powerhead to access the upper one. But of course the powerhead does have to come off if you want to access the lower one. The second one on the lower end is around the bearing, and the powerhead has to not only come off, but also come apart to get at that one—-not a normal service requirement.
You know those lower pans can be removed without removing the powerhead—don’t you?