Home › Forum › Ask A Member › Evinrude 35 hp control or electric maybe late 80s › Re: Evinrude 35 hp control or electric maybe late 80s
July 4, 2018 at 1:15 am
#78993
Well, you would hold the black plastic latch in place on the warm up lever, then drill the two holes through the openings in the black plastic latch through the top half of the warm up lever. No need to drill through both sides of the warm up lever, that detent ball set up should just be pryed out so the plastic filler can be slipped inside for the latch screws to thread into…
Feel free to email me pictures of the other control box you are considering.