Re: Got My Separation Finalised Today……

[Mumbles]

Hey Chuck, only one of my clamps was tight and while I had the torch out, I heated it and managed to break it free after cutting the clamp bracket stud in half. The tilt tube can stay in place as I’ll polish the ends of it with a strip of emery and the bores in the clamps will get cleaned up with a small hone. I used the hone in the swivel tube bracket and saddle bores and now the swivel tube slides right in. I’ll be sure to make up some new friction pads for the co-pilot or else the motor will be jumping around like a wounded fish when it’s running!