Home › Forum › Ask A Member › Got My Separation Finalised Today…… › Re: Got My Separation Finalised Today……
June 18, 2018 at 2:10 am
#78106
Impressive work; the fact that you’ve never worked on one of those before doesn’t seem to hinder you one bit 🙂
On mine…..it swivels easily (too easily) but will not tilt at all. Well; if I use a long pry bar I can get it to move a bit but it is essentially still stuck hard.
The two large 1.25" bolts on each side of the transom clamp are loose; should I be able to knock that shaft out fairly easily? It sure ain’t budging and I don’t want to break something. I look at the parts diagram and there doesn’t seem to be anything holding it in there except for the bolt at each end.
Chuck