Home › Forum › Ask A Member › Merc 200 Swivel Pin › Re: Merc 200 Swivel Pin
June 16, 2018 at 12:32 am
#78022
While you are at it remove the tilt tube #4 on the ME pic. We had an old oven we used for things like this (along with block sleeving. Heat the whole piece to about 300*. You need welding gloves & decide how you are going to press it before you heat it. Can be quite the job or go smoothly. Usually a bitch! Good luck. After you get it apart clean up will be easy.
Dan in TN