Re: Pulsating 15hp detuned down to a 9.9 question

[johnyrude200]

So this motor we were talking about has come back to haunt me. Customer is telling me some days it runs totally fine, other days it won’t go above low-mid range. I am thinking that this is the culprit. Now I have heard of these types of issues before, and the customer is bringing the motor back so I can hopefully correct the issue. If it isn’t a missing low speed needle bearing being absent, then I’m going to look at the armature plate.

Now I have tons of parts motors; when I read your post a couple of weeks back, I was thinking, it would be easier just to swap out parts?