Re: 1955 Evinrude 25hp Big Twin No Start

Home › Forum › Ask A Member › 1955 Evinrude 25hp Big Twin No Start › Re: 1955 Evinrude 25hp Big Twin No Start

May 11, 2018 at 10:01 pm #75808
chris-p
Participant

    Have you tested that meter on other motors? Perhaps it always reads low. If it is reading correctly, that is too low for a Big Twin. Might be stuck rings, might be worse. That would be my primary concern,

    If all is well there, pop the flywheel. The flywheel key may be sheared, bare minimum you need to go through the ignition.

    Keep us posted.